Liquid cooling equipment is suitable for semiconductor testing, electronic equipment constant temperature testing, cooling server supporting infrastructure, and other fluid temperature control places.
- The heating method within 40 ℃ is heated by compressor hot air.
- The circulation system adopts a fully closed design, and the circulation pump adopts a magnetic drive pump.
- 100% helium detection, 100% safety inspection to ensure the safety
and reliability of the system.
- 100% continuous operation of copy machine after 24 hours.
- Condenser Micro-channel heat exchanger (air-cooled), plate heat exchanger (water-cooled)
- Evaporator: plate heat exchanger
- Throttling device: electronic expansion valve
- Control system: PLC programmable controller
- Communication: RS485 interface Modbus RTU protocol, Ethernet interface TCP/IP protocol
- Operation interface: Wuxi Guanya customized 7-inch color touch screen, temperature curve display\EXCEL data export
- Circulation system: The whole system is a fully closed system, low temperature does not absorb moisture in the air, does not volatilize heat transfer medium, low temperature automatically replenishes heat transfer medium into the circulation system.
- Shell material: cold-rolled plate spray RAL7035
- The inside of the pipeline contains: stainless steel SUS304, copper, ceramics, silicon carbide, silicone sealant, PTFE.
|Flow control is adjusted by frequency converter
|The plant service water exchanges heat with the brine, and the brine provides cooling capacity for the heating equipment
|Water, silicone oil, fluorinated liquid, ethylene glycol aqueous solution, etc.
|PLC, fuzzy PID control algorithm, with cascade control algorithm
|Heat transfer medium outlet temperature control mode式
|letter of agreement
|Ethernet interface TCP/IP protocol
|RS485 interface modbus RTU protocol
|Device Internal Temperature Feedback
|Equipment heat transfer medium outlet temperature, medium inlet temperature, cooling water temperature
|Pressure sensor real-time monitoring
|Using the pressure sensor to detect and display on the touch screen
|Plate heat exchanger, special attention: need to use clean factory water
|Wuxi Guanya customized 7-inch color touch screen, temperature curve display\EXCEL data export
|With self-diagnosis function; phase sequence and phase failure protector; pressure protection, overload relay, thermal protection device and other safety protection functions.
|In and out interface size
|Cooling water interface
|Water-cooled, the factory water temperature is lower than the minimum temperature provided by the equipment by more than 3°C, and the water temperature fluctuation is ≤3°C
|Cooling water flow 7～20℃
|Power supply 380V 50HZ
|Cold-rolled sheet spray RAL7035