LNEYA CHILLERS
AES（-120℃~225℃）
Temperature Forcing System丨Thermal Stream- Temperature Range-120℃~225℃
- Temp. Control Accurcy±1℃
- Air Handling Capactiy10㎡ ~ 30㎡ 5bar~7.6bar
- Cooling Water AT 25℃0.6m³~3m³
- Power max 380V50HZ3.7kW 220V ~ 7.5kW 380V
- Place of OriginChina
- Quality Guarantee Period12 months
Application
Precise thermal cycling of electronics, chips and, IC’s as well as semiconductors.Provide precise thermal cycling for your tests.
WORKING PRINCIPLE：
The output airflow hood of the testing machine covers the tested object to form a test chamber with a relatively closed space. The high-temperature or low-temperature airflow output by the testing machine makes the surface temperature of the tested object change dramatically, so as to complete the corresponding high-temperature and low-temperature impact test;
Compared With The Traditional Incubator, It Has The Following Characteristics:
Temperature range: – 120 ℃ ~ + 300 ℃；
The temperature rise and fall rate is very fast, 150 ℃ ~ – 55 ℃ < 10 seconds；
Maximum atmospheric flow: 30m ³/ h；
Real time monitoring the real temperature of the measured IC, realizing closed-loop feedback and adjusting the gas temperature in real time；
Temperature rise and fall time is controllable, programmed operation, manual operation and remote control；
Test conditions: ambient temperature 20 ℃, 30m ³/ h. 5bar, compressed air or nitrogen；
| Model | AES-4535 | AES-6035 | AES-8035 | AES-A1035W | AES-A1235W | ||
| AES-4535W | AES-6035W | AES-8035W | |||||
| Temp. Range | -45℃～225℃ | -60℃～225℃ | -80℃～225℃ | -100℃～225℃ | -120℃～225℃ | ||
| Heating Power | 3.5kW | 3.5kW | 3.5kW | 4.5kW | 4.5kW | ||
| Refrigerating Output | -45℃ | 2.5kW | |||||
| -60℃ | 2kW | ||||||
| -80℃ | 1.5kW | ||||||
| -100℃ | 1.2kW | ||||||
| -120℃ | 1.2kW | ||||||
| Temp. Control Accuracy | ±0.5℃ | ±0.5℃ | ±1℃ | ±1℃ | ±1℃ | ||
| Temp. Conversion Time | -25℃ to 150℃ Approximately 10S 150℃ to -25℃ Approximately 20s |
-45℃ to 150℃ Approximately 10S 150℃to -45℃ Approximately 20s |
-55℃ to 150℃ Approximately 10S 150℃to -55℃ Approximately 15s |
-70℃ to 150℃ Approximately 10S 150 ℃to -70℃ Approximately 20s |
-80℃ to 150℃ Approximately 11S 150℃to -80℃ Approximately 20s |
||
| Air Requirement | Air Cleaner<5um | ||||||
| Air Oil Content:<0.1ppm | |||||||
| Air Temp&Humidity：5℃～32℃ 0～50%RH | |||||||
| Air Handing Capacity | 7m3/h ～ 25m3/h Pressure 5bar～7.6bar | ||||||
| System Pressure Dispiay | Pressure of Refrigeration system is realized by pressure gauge (High pressure, low pressure); | ||||||
| Pressure of circulatory system is detected by pressure sensor and displayed on touch screen. | |||||||
| Controller | Siemens PLC, Fuzzy PID Control algorithm. | ||||||
| Temp. Control | Control of outlet temperature | ||||||
| Programmable | 10 procedures can be developed, and each program can be composed of 5 steps | ||||||
| Communicating Protocol | Ethernet Interface TCP/IP Protocol. | ||||||
| Internal Temp. Feedback | Equipment outlet temperature, refrigeration system condensation temperature, ambient temperature, compressor suction temperature, cooling water temperature (water cooling equipment is configured) . | ||||||
| Temp. Feedback | T Temperature Sensor | ||||||
| Compression Engine | Taikang,France | Taikang,France | Taikang,France | Italy Duling | Italy Duling | ||
| Evaporimeter | Double-pipe (heat) Exchanger | ||||||
| Calorifier | Flanged Barrel Heater | ||||||
| Refrigeration Accessory | Danfoss / Emerson fittings (dry filters, oil separators, high and low pressure protectors, expansion valves, solenoid valves). | ||||||
| Operation Panel | LNEYA custom 7-inch color touch screen, temperature curve display\ EXCEL data export. | ||||||
| Safe Guarding | With self-diagnosis function; phase sequence phase breaker, freezer overload protection; high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions. | ||||||
| Cryogen | Topsubmixed Refrigerant | ||||||
| External Insulation Hose | 8m DN32 fast coupling clamp for easy outgoing insulation hose | ||||||
| Shape Dimension (Wind)cm | 54*69*132 | 54*69*132 | 75*73*133 | 80*120*185 | 100*150*185 | ||
| Shape Size (Water)cm | 54*69*132 | 54*69*132 | 75*73*133 | 70*100*175 | 80*120*185 | ||
| Air-Cooled Type | Copper tube aluminum fin condensation mode, upper and out type, condensing fan using Germany EBM axial flow fan. | ||||||
| Water-Cooled Type W | Type W is water cooled | ||||||
| Water-Cooled Condenser | Sleeve type heat exchanger (Paris/ Shen’s) | ||||||
| Cooling Water Quantity At 25℃ | 0.6m3/h | 1.2m3/h | 1.6m3/h | 2.6m3/h | 3m3/h | ||
| Source 380V 50HZ | 3.7kW max | 5kW max | 5kW max | 6.8kW max | 7.5kW max | ||
| Source | Customizable 460V 60HZN 220V 60HZ three-phase | ||||||
| Shell Material | Cold rolled sheet spray (Standard Colour 7035). | ||||||
| Temp. Spread | High Temperature To +300℃ | ||||||
RECOMMENDED PRODUCTS
- View details
TES (-45 ~ 250℃)
Solving the problem of temperature control lag in electronic components. Ultra high temperature cooling technology can be cooled directly from 300°C.
- View details
TES (-60 ~ 200℃)
Solving the problem of temperature control lag in electronic components. Ultra high temperature cooling technology can be cooled directly from 300°C.
- View details
TES (-85 ~ 200℃)
Solving the problem of temperature control lag in electronic components. Ultra high temperature cooling technology can be cooled directly from 300°C.
loading…
已经是到最后一篇内容了！