Refrigeration Unit / Industrial Freezer&Refrigerator GY
- Temperature Range-150℃~-20℃
- Power 380V 50HZ12kW~40kW
- Place of OriginChina
- Quality Guarantee Period12 months
Assembly of various hot work molds and cold work molds; assembly of gears and shafts of various gearboxes and gearboxes; assembly of precision mechanical parts; assembly of various motor stators and rotors; automobile parts and engine parts.
Composed of a compressor, condenser, evaporator, filter drier, expansion throttling valve of the five most series, note the amount of refrigerant inside (refrigerant), the electrical appliances (including controller) according to the requirement of the environment and control the operation of the compressor to achieve the purpose of heat transfer and refrigeration.
Mainly used in industrial cold treatment, the uniform, fine and dispersed carbides produced on the metal structure matrix structure are precipitated. The appearance of such carbides will result in a significant increase in the wear resistance and friction properties of the metal, an increase in hardness, and will directly increase the life of the wear parts. The ideal product to replace liquid nitrogen.
- Multi-safety protection, more reliable operation.
- France TECUMSEH compressor, Germany DANFOSS compressor, EMERSON compressor, automatic cascade refrigeration technology.
- With self-diagnosis function, freezer overload protection, high-pressure switches, overload relays, thermal protection device and other security functions, and fully guarantee the use of safety.
- Three sealed mold layer of insulation, Extra-thick high-density polyurethane foam insulation layer, the effect of good insulation; Inline vacuum insulation panels.
- Human design, more convenient and flexible.
- Suitable for mechanical producing plant use.
- Used for shrinkage of copper sleeves, bearings, etc., widely used in precision mechanical assembly. Applied to ultra-low temperature testing of large equipment.
|Designed bearing capacity is two times of the standard one, (refrigeration system is designed according to the standard
capacity when target artifact weight is greater than the standard capacity, the cooling rate will decrease)
|Cooling capacity||0.7kw -110℃||1 kw -110℃||2 kw -110℃||1kw -125℃||2 kw -125℃||1 kw -140℃||2kw -140℃|
|Nickel-chromium alloy electric heating heater, the controller has double safety protection, with independent temperature
|Cooling rate||Ambient temperature of 25℃, no-load,（from 0℃to -110℃ about 1 .5 hour；|
|from 0℃ to -140℃ about 2 hours, cooling rate will be a little different for ambient temperature changes.|
|Controller||ASET multifunctional controller|
|Operation panel||7-inch color touch screen, display set temperature, measured temperature.|
|Temp. record||Temperature curve and fault record, U-disk data export, excel format.|
|Inside circulating air||2100 m³/h||2750 m³/h||4500 m³/h||2750 m³/h||4500 m³/h||2750 m³/h||4500 m³/h|
|When it is open, the internal circulation fan automatically turns off. The touch screen displays open state.|
|Compressor||Emerson Copeland, adopt cascade refrigeration technology|
|KAORI Plate heat exchanger|
|Expansion valve||Electronic expansion valve|
|Evaporator||Copper-tube with aluminum-fin|
|Cooling Type||Air-cooled with water-cooled auxiliary functions (Ensure good cooling capacity when temp. above 30℃)|
|Means of insulation||Polyurethane foam insulation, thermal insulation layer 150 mm, with embedded FIR boards|
|Safety Protection||Self-diagnosis function; Phase sequence phase failure protection; leakage protector; cooling unit overload protection;
high and low-pressure switch, overload relay, thermal protection, high-temperature protection and temperature
|Case material||Outside is cold rolled steel painting, internal is SUS304 wire drawing board.|
|Refrigerant||Mix Refrigerant from LNEYA|
|Power 380V 50HZ||12KW MAX||16.5KW MAX||20KW MAX||18KW MAX||25KW MAX||23KW MAX||30KW MAX|
|Optional||High temperature reaches 80℃ and temperature accuracy is ±0.5℃；the input power will be changed.|
|Optional||Temp. accuracy ±0.5℃|
|Optional||Cooling and heating program controlled, meet cold treatment process requirements(can set 5 programs, each
program can edit 45 steps.)
|Optional||Interior door, reduce cooling capacity lost when picking small workpieces (temperature below 60℃ optional)|
|Optional||Outside SUS304 wire drawing board case|
|Optional||Diameter 50mm cable hole|
|Optional||Electric heating vacuum glass observation window (with lighting) 200mm*300mm|
|Optional||Low temperature automatic defrost (can be once per hour or use manual button to defrost), ensure it can work at
low temperature for a long time even the door is open and close frequently）
- View details
Used for shrinkage of copper sleeves, bearings, etc.
- View details
industrial refrigerator GX -80C used for assembly of various hot work molds and cold work molds
- View details
Inquiry Email Us Product Details Application: Composed of a compressor, condenser, evaporator, filter drier, expansion throttling valve of the five most series, note the amount of refrigerant inside (refrigerant), the elect…