Keyword Recirculating Chiller Ultra-low Temp Chillers SUNDI series TES series Products

How to deal with the low efficiency of the isolated explosion-proof heating and cooling circulator?

Heat dissipation is a common problem that leads to the inefficiency of isolated explosion-proof heating and refrigeration circulators, and it is also a problem that is prone to occur. Many isolated heating and refrigeration circulators will have similar problems, so how to deal with such problems.

HRT
  1. Due to the complex structure of the isolated explosion-proof heating and refrigeration circulator, and each equipment may have different principles and operating modes, once a problem occurs, such as the shutdown of the air-cooled electronic fan, the heat dissipation problem will randomly occur, or the water-cooled The cold water system of the cooling tower is not smooth, and there will be heat dissipation problems.

2.The heating device jacket and coil (inner coil and outer coil) of the isolated explosion-proof heating and refrigeration circulator are all indirectly heated, that is, the cold and hot medium is passed into the jacket and the coil to heat up. Or lower the temperature, and set the upper limit of the required working temperature of the reactor according to the required production process.

3.It is not used in accordance with the use requirements of the isolated explosion-proof heating and refrigeration circulator, has a fixed input voltage and the use requirements of related equipment, and is not used in accordance with the use requirements of the equipment, such as the voltage is too high or too low, and the condensation is not cleaned on time according to the use requirements. Inefficient heating and refrigeration circulators will be made less efficient by the use of heat exchangers and related components, and the failure to increase the refrigerant according to the usage.

4.When the temperature is lower than a certain temperature, it will automatically heat up, and if it is higher than a certain temperature, the heating will be stopped, and the power will be automatically cut off and no longer heated, so as to maintain the continuity of the working temperature and time in the kettle. The production process is determined, and attention should be paid when configuring.

There is still a problem that cannot be solved, that is, the failure or damage of components: if you check according to the basic maintenance method, you still cannot find the cause, you can communicate with the manufacturer of the isolation heating and refrigeration circulator, and the quality of after-sales service is also a measure of the relevant equipment manufacturers. sufficient reason for suitability.

If you have any questions about the above or need to know about the equipment, you can contact LNEYA for help sales001@lneya.com

Expand more!